How to Apply Mini Sclera Halloween Contact Lenses Safely

By MesmerEyez | Published: 2026-10-21

Category: How-to Guides

Learn the safe, step-by-step process for inserting and removing 17mm mini sclera Halloween contacts, plus key tips to avoid common mistakes.

Quick Answer

Applying mini sclera Halloween contact lenses requires extra care due to their larger 17mm diameter. Follow a clean, slow process with proper positioning and a steady hand to avoid discomfort or eye injury.

Why Mini Sclera Lenses Need Special Handling

Mini sclera lenses are larger than standard colored contacts—typically 17mm in diameter—so they cover more of the eye's surface. This makes them trickier to insert and remove, especially for beginners. The extra coverage also means the lens can trap debris or air bubbles if not placed correctly, leading to irritation or blurred vision.

The key trade-off is visual impact versus ease of use: you get a dramatic Halloween look, but you need to be more deliberate with hygiene and technique. Always start with clean hands and a clean lens case.

Step-by-Step Application Guide for Mini Sclera Contacts

Prepare Your Workspace and Hands: Wash your hands thoroughly with fragrance-free soap, then dry with a lint-free towel. Place a mirror on a clean, well-lit surface. Have your lens case, fresh solution, and a small plunger (if needed) ready. Common mistake: using scented soap or towels with lint can transfer irritants to the lens.
Inspect and Rinse the Lens: Remove the lens from its case and place it on your fingertip. Check that it is not inside out (the edges should form a smooth bowl, not a lip). Rinse with fresh multi-purpose solution—never water or saliva. Checkpoint: if the lens feels dry or has a torn edge, discard it and use a fresh one.
Position the Lens on Your Finger Correctly: Place the lens on the pad of your index finger, not the tip. Use your middle finger to pull down your lower eyelid. Look upward, then gently place the lens on the lower white part of your eye (below the iris). Common mistake: placing the lens directly on the iris can trap air and cause discomfort.
Slowly Release and Blink: Remove your finger and slowly release your eyelid. Look down and blink gently to center the lens. If the lens feels scratchy or moves too much, it may be off-center—use a clean finger to nudge it toward the center. Checkpoint: if you see an air bubble, blink repeatedly or gently massage the closed eyelid to release it.
Repeat for the Other Eye: Always apply the lens to the same eye first to avoid mix-ups. Repeat steps 2–4 for the second lens. Wash your hands again before handling the second lens if you touched your face. Common mistake: mixing up left and right lenses can cause fit issues—keep them in labeled case slots.
Remove with Care at the End of the Day: Wash hands again. Look upward, pull down the lower lid, and gently slide the lens downward onto the white of the eye using your fingertip. Pinch the lens gently with your thumb and index finger to remove it. Never pull directly from the center. Checkpoint: if the lens feels stuck, rinse the eye with fresh solution—do not force removal.

Featured Product

Mini Sclera Red 17mm Halloween Contact Lenses: Mini Sclera Red 17mm Halloween Contact Lenses feature a vibrant Red colour that covers more of the eye, perfect for a spellbinding transformation. The larger 17mm diameter means you need to follow specific insertion steps to avoid discomfort or air bubbles—this guide covers exactly how to do that.
Mini Sclera Red 17mm Halloween Contact Lenses